Rational designs - misunderstood fire design solutions

25 May 2016
Inhaling five breaths in a smoke filled room can lead to death. It is therefore imperative for buildings to be designed to allow for safe escape and the control of fire and smoke, as a minor design flaw could potentially put people, equipment and property at risk.
Document Downloads 
application/vnd.openxmlformats-officedocument.wordprocessingml.document iconPress release_Rational designs - misunderstood fire design solutionsres17.58 KBDownload
PreviewA rational design is detailed for fire safety and prevention mechanisms4.3 MBDownload
PreviewRational design begins with a qualitative design review1.03 MBDownload

All buildings in South Africa need to comply with the requirements of the National Building Regulations and Building Standards Act, 1977 (Act No. 103 of 1977), Fire Protection, as set out in SANS 10400 Part T: 2011

A deemed to satisfy fire safety solution is one where the dimensions and construction of the building, the materials used in the construction, the occupancy and storage of items in the building all fall within the prescriptive requirements or limitations set out in SANS 10400-T.

Any deviation from the prescriptive requirements or limitations requires a rational design to be completed in accordance with the fire engineering methodology framework requirements of BS 7974, Application of fire safety engineering principles to the design of buildings, supported by the published documents that form part of the BS 7974 framework. Johannesburg-based ASP Fire is a specialist in this field.

A rational design is the detailed design of fire safety and prevention mechanisms and strategies in a building in order to comply with the National Building Regulations, where prescriptive requirements cannot be met. This process is not elective, inasmuch as that only certain parts of the framework may be used, or that the results of the process are subjective or optional.

CEO Michael van Niekerk says that a rational design begins with a fire risk consultant visiting the premises, or reviewing a set of new building plans, for a comprehensive evaluation of all areas of the property – looking at all areas of fire safety and risk in detail. “Sound fire engineering principles are applied to ensure that the design complies with the life, building, fire behavioural and environmental fire safety objectives required by law.”

When undertaking a rational design, ASP Fire abides by the framework that is set out in the internationally-recognised BS7974 British fire safety standard. Many designers in South Africa do not follow this methodology, either because they do not fully understand it, or because they elect to apply only certain elements of the framework – completely unaware that they are putting people’s lives and assets at risk. Often consultants copy and paste from previous rational design reports unaware that they are including errors or mistakes in evaluating or applying fire engineering principles; sometimes even including errata in formulae or fire safety designs.

According to van Niekerk, the three main causes of fire are electrical, arson and heating equipment. “In the event that a major fire that results in immense damage and the possible death of occupants, the fire engineer will be held liable. Rational design takes into account the behaviour of a building during a fire, thereby minimising the potentially devastating impact it might have,” he explains.

The products stored or manufactured in the building, the occupants of the building and the built and natural environments are also analysed. Other aspects to consider include how people will respond to a fire, based on their level of alertness and familiarity with their surroundings. A fundamental basic is that the building should be designed to withstand fire so that occupants, including disabled persons, can escape safely, and appropriate fire equipment must be in an adequate and easily-accessible area.

“Fires can be dealt with through three main actions. The first is controlling the growth of the fire to prevent it from spreading. The next is suppression, which involves rapidly cooling the fire. Finally, extinguishing the fire means that there is no heated substance remaining. Evacuation should also be safe and easy while allowing unrestricted access for emergency services. The installed fire detection system must be able to pick up the fire as soon as possible, so that it can warn occupants and allow them to escape before untenable conditions are reached,” says van Niekerk.

The rational design process

Rational design begins with a qualitative design review, which includes; an architectural review, fire safety objectives, fire hazards and risks, trial fire safety designs, and worst-case fire scenarios for analysis. Consultants often ignore the building roof’s geometry and the required substitute rectangular volume used in smoke fill formulae.

The next step is quantitative analysis according to BS7974 published documents. Here, the main focus is on the development of fire within the enclosure of origin, spread of smoke within the enclosure of origin, structural response and fire spread beyond the enclosure of origin, detection of fire and activation of fire protection systems, fire services intervention, and evacuation of occupants.

Assessment against criteria is the final step, where the fire safety designs developed during the engineering analysis are assessed to ensure that the objectives established at the beginning of the process are in fact met.

After the completion of the fire risk assessment and the drafting of the rational design report, ASP Fire provides the client with a report with practical actions to follow. Van Niekerk states that the report comprises a detailed and documented objective fire risk assessment, as well as fire engineering calculations and analysis where required, covering all aspects of fire risk and safety.

“This guides the client in protecting its business, employees and customers by providing prioritised recommendations for action, in order to rectify problem areas and strengthen existing fire safety procedures. This also ensures that the client complies with fire safety regulations for the protection of life, property and the environment,” van Niekerk elaborates.

As part of its value-added service, ASP Fire also works closely with insurance brokers and underwriters to address a client’s fire risk based on the outcomes of the fire safety risk assessment report. This assists in preventing damage to property and products, loss of life, financial loss, consequential loss of profit, loss of productivity and insurance repercussions.

“We also provide flammable liquid store designs and certification, special risk fire protection systems, visual safety awareness programs, SHEQ safety file drafting and implementation, emergency response and business continuity plans, emergency evacuation plan design, emergency evacuation drills and fire equipment training,” adds van Niekerk.

What’s more, van Niekerk reveals that ASP Fire also offers standardised and customised client training. “The client has the option to select a standard fire risk and safety course, or have a customised training programme developed around individually specific needs, or the areas indicated in the fire safety risk assessment report,” he concludes.



Notes to the Editor
To download hi-res images for this release, please visit http://media.ngage.co.za and click the ASP Fire link to view the company’s press office.

About ASP Fire
ASP Fire operates across the entire African continent from its Gauteng base, providing professional, accredited fire risk management and support to its clients. ASP Fire designs, installs and maintains a full range of fire detection and suppression equipment suited to clients’ needs. ASP Fire provides a holistic, proactive and preventative fire solution based on integrated fire risk assessment, training and consulting, with the installation and maintenance of fire detection and suppression systems that meet SABS, NFPA, FPASA, FDIA and SAQCC standards.

ASP Fire Contact
Michael van Niekerk
Phone: +27 (0) 11 452 2169
Cell: +27 (0) 83 779 1701
Fax: +27 (0) 86 505 1030
Email: michael [at] aspfire [dot] co [dot] za
Web: www.aspfire.co.za

Media Contact
Nomvelo Buthelezi
NGAGE Public Relations
Phone: (011) 867-7763
Fax: 086 512 3352
Cell: 083 4088 911
Email: nomvelo [at] ngage [dot] co [dot] za
Web: www.ngage.co.za

Browse the NGAGE Media Zone for more client press releases and photographs at http://media.ngage.co.za